Tags
Tab Item Content
Join Us!
Archives Meta
Archaeology by Prau...
 
Notifications
Clear all

Archaeology [Sticky] Archaeology by Prau123

2,946 Posts
12 Users
0 Reactions
6.8 M Views
Prau123 avatar
Posts: 4441
Topic starter
(@prau123)
Famed Member
Joined: 8 years ago

Besides Amber and Copal, what Organic Gemstones have trapped organic materials such as insects, lizards, plants, plus more?

 

 

 

 

 

 

 

 

The only scientifically authenticated gemstone known to contain an intact insect inside—aside from amber and copal—is precious opal. [1, 2]
Because most gemstones form slowly under intense heat and pressure deep underground, biological matter is almost always destroyed during crystallization. Opal is a rare exception because it forms near the Earth's surface at low temperatures from silica-rich water. [1, 2, 3]
 
image
 
image

 

 
image

 

 
 
 
Famous Authenticated Specimens
  • The Java Precious Opal: In 2018, gemologist Brian Berger acquired a polished precious opal from Java, Indonesia, containing a remarkably complete insect. The https://www.gia.edu/gems-gemology/spring-2019-microworld-fossil-insect-in-opal .">Gemological Institute of America (GIA) authenticated the specimen as natural, untampered opal. Scientists theorize the insect was first trapped in tree resin (amber) that later underwent opalization as silica-rich water replaced the organic material. [1, 2, 3, 4]
  • The "Beverly" Opal: In 2020, researchers published a study in Nature Scientific Reports documenting a second insect specimen (a beetle-like arthropod nicknamed "Beverly") preserved inside a near-transparent opal formed through surface weathering. [1]
Other Materials & Common Misconceptions
  • Other Tree Resins: Younger or regional tree resins like kauri gum (from New Zealand) and dammar frequently trap insects. However, gemologically, these are classified under the same broader resin/copal family rather than as true mineral gemstones.
  •  
  • image
  •  
  • Selenite, Calcite, and Quartz: While low-temperature minerals like selenite or https://www.rockngem.com/9-types-of-inclusions-in-quartz/ .">quartz occasionally trap ancient water bubbles, algae, or plant debris, verified whole-insect inclusions in transparent crystalline gems are virtually nonexistent. Pieces sold as "citrine" or "quartz" with bugs inside are almost always misidentified amber, copal, or modern synthetic resin. [1, 2]
  • Fossilized Replacements (Not Encased): Minerals like pyrite, calcite, and chalcedony can replace an insect's body over millions of years to create a solid fossil cast, though the bug is turned into stone rather than suspended inside a transparent gem.

 

 

 

 

 


Reply
Prau123 avatar
Posts: 4441
Topic starter
(@prau123)
Famed Member
Joined: 8 years ago

 

2,000-Year-Old Roman ‘Wow Glass’ Morphs Into Something Beautiful

 

image

 

image

Two millennia ago, delicate glass vessels that potentially served as containers for wine, water, exotic fragrances in ancient Rome, shattered and met their untimely demise. They found their way into the layers of the earth, going through the environmental changes that accompany erosion and corrosion, subject to humidity, temperature, mineral exposure, amongst others. In their present form, these shards of Roman glass are a range of gorgeous colors on the spectrum, from cerulean blues to notes of vibrant orange.

When Fiorenzo Omenetto, a materials scientist at Tufts University who co-authored the new paper, identified a shard during a visit at the Italian Institute of Technology's Center for Cultural Heritage Technology, he had a eureka moment! Terming it the “wow glass”, this particular fragment was uncovered near the ancient city of Aquileia, Italy. The shard was put under the scientific lens, and led to the publishing of a brilliant new study in the Proceedings of the Natural Academy of Sciences (PNAS).

 

 

Corrosion and Erosion: Nature the Ultimate Nanofabricator

Over the course of thousands of years, the molecules within the glass underwent a remarkable transformation, undergoing rearrangement and recombination with minerals. This intricate process led to the formation of what are scientifically known as photonic crystals—precisely ordered atomic arrangements that possess the unique ability to filter and reflectlight in highly specific ways. These exquisite glass artifacts frequently find new life as components of jewelry, while their larger and more intact counterparts often grace the displays of esteemed museums.

 
 
image

A small sample of the ‘golden’ patina from a piece of Roman glass. (Florenzo Omenetto and Giulia Guidetti/PNAS)

Nature is often believed to be the ultimate nanofabricator. The applications of photonic crystals in modern technology can serve as the building blocks for creating waveguides, optical switches, and other cutting-edge devices that enable lightning-fast optical communications within computers and across the internet.

The “wow glass” prompted researchers to soon realize that what they were looking at was nanofabrication of photonic crystals by nature. “It’s really remarkable that you have glass that is sitting in the mud for two millennia and you end up with something that is a textbook example of a nanophotonic component,” said Omenetto. 

By virtue of their engineered capacity to selectively block specific wavelengths of light while permitting others to pass through, photonic crystals play pivotal roles in the development of filters, lasers, mirrors, and even anti-reflection (stealth) devices.

The authors of this study have delved into the intricate atomic and mineral structures that emerged from the original silicate and mineral components of the glass. This process was modulated by factors such as the surrounding environment's pH levels and the fluctuating groundwater levels within the soil, reports a press release by Tufts University.

“This is likely a process of corrosion and reconstruction,” said Guidetti. “The surrounding clay and rain determined the diffusion of minerals and a cyclical corrosion of the silica in the glass. At the same time, the assembly of 100 nanometer-thick layers, combining the silica and minerals, also occurred in cycles.”

 

image

 

From the study depicts various views of aged Roman glass fragment and its iridescent patina. (Giulia Guidetti/Tufts University)

 

Conducting a Chemical Analysis of Roman Glass: Alternating Silicone Layers and Patina

The chemical analysis conducted by the Italian Institute of Technology team dated the glass fragment to a period spanning from 100 BC to 100 AD, with indications pointing to its origin in the sands of Egypt, suggesting global trade during that era. The majority of the fragment retained its original dark green hue, while a millimeter-thick patina on its surface exhibited an almost flawless mirror-like gold reflection, reports Ars Technica.

The result is an incredibly ordered arrangement of hundreds of layers of crystalline matter. Omenetto and Guidetti utilized a novel scanning electron microscope capable of not only unveiling the material's structure but also providing elemental analysis. Guidetti explained, "Basically, it’s an instrument that can tell you with high resolution what the material is made of and how the elements are put together."

Their examination revealed that the patina possessed a hierarchical structure consisting of regularly alternating silica layers, each micrometers-thick and varying in density, akin to reflectors known as ‘Bragg stacks’. Each Bragg stack displayed strong reflection of specific, relatively narrow wavelengths of light. The golden mirror-like appearance of the patina was the result of the vertical stacking of multiple Bragg stacks.

“While the age of the glass may be part of its charm, in this case if we could significantly accelerate the process in the laboratory, we might find a way to grow optic materials rather than manufacture them,” Omenetto explained.

 

The glass represents an opportunity to understand the environmental history of the ever changing ground, due to the city’s evolution. This will help with understanding the natural histories of many places that possess these shards embedded in the soil, going forward.

Top image: A magnified perspective of photonic crystals present on the surface of ancient Roman glass.  Source: Giulia Guidetti/Tufts University

 

 

 

 

 

 

 

 

 

 

 

Article

 

 

 

2,000-Year-Old Roman ‘Wow Glass’ Morphs Into Something Beautiful | Ancient Origins

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The “wow” glass is a dark green fragment of ancient Roman glass recovered in 2012 near the archaeological site of Aquileia, Italy, dating from between the 1st century BCE and the 1st century CE. [1, 2]
Researchers at Tufts University's Silklab and the Italian Institute of Technology's Center for Cultural Heritage Technology (IIT) dubbed it the "wow glass" because of its striking, mirror-like golden metallic sheen. [1, 2]
What Made It Special
  • Natural Photonic Crystals: Instead of the typical flaky or iridescent weathering seen on old glass, scientists discovered that sitting in the mud for two millennia caused a cyclical, pH-driven chemical process involving surrounding clay and rain. [1, 2]
  • Bragg Stack Structure: This natural corrosion and reconstruction created a precise, nanometer-thick hierarchical layering of silica and minerals that functions as a textbook 1D photonic crystal, which can block or reflect specific wavelengths of light. [1, 2]
If you'd like, I can share more about other ancient Roman optical feats—such as dichroic glass like the Lycurgus Cup or how they manufactured early window glass.

 

 

 

 

 

 

 

 

 

 

 

 

 

 
"Roman wow glass" is a nickname given by researchers to a 2,000-year-old dark green Roman glass fragment discovered near Aquileia, Italy, whose surface naturally transformed over centuries into a mirror-like, golden photonic crystal. [1, 2]
Key Scientific Findings
  • Natural Nanostructure.

    Over centuries of burial in clay and exposure to rainwater, cyclical pH-driven corrosion and mineral diffusion rearranged the glass's surface into ordered nanometer-thick layers. [1, 2]

  • Bragg Stack Formation. These alternating high- and low-density silica layers form a one-dimensional "Bragg stack" that acts as a precise optical filter and golden reflector. [1, 2]
  • Ancient Composition. Dating between the 1st century BCE and 1st century CE, the artifact was crafted using high-titanium Egyptian sand and naturally contained iron impurities. [1]
  • Modern Tech Potential. Scientists at institutions like Tufts University are studying how to accelerate this natural self-assembly in labs to grow optical waveguides, switches, and lasers. [1]
Other Famous Roman Glass Wonders
  • Color-Changing Dichroic Glass. Artifacts like the 1,600-year-old Lycurgus Cup use embedded gold and silver nanoparticles to appear jade-green in reflected light and glow ruby-red when lit from behind.
  • Carved Cage Cups (Diatreta). Artisans carved intricate, freestanding lacework cages out of solid glass blocks, with only about ten complete examples known to survive today.
  • Early Window Panes. Romans pioneered architectural window glass by casting molten glass into wooden frames or flattening blown glass cylinders to let diffused light into baths and villas. [1, 2, 3, 4]

 

 

 


Reply
Prau123 avatar
Posts: 4441
Topic starter
(@prau123)
Famed Member
Joined: 8 years ago

 

Experiments Turned Diamonds Into a Liquid and Made a Super Diamond

 

 

 

 

 

 

 

 

 

 

 

 


Reply
Prau123 avatar
Posts: 4441
Topic starter
(@prau123)
Famed Member
Joined: 8 years ago

 

Etruscan Gold Grains With No Solder. The Lost Art Was Never Lost

 

 

 

 

 

 

 

 

 

This gold brooch's pattern isn't made of lines. It's thousands of tiny gold grains. Etruscans made it 26 centuries ago. The smallest grains are 0.14 millimeters wide. Strangely, there's no trace of solder where they're attached. They look simply placed there, yet never fall. Why not just solder them? It floods the gaps. Fuse them? The grains melt into blobs. Rome's famous Castellani goldsmiths hit a wall. The sandlike grains, they wrote, were nearly insurmountable.

They even searched ancient texts. Goldsmiths agreed it couldn't be copied. It became a lost secret. The likeliest answer came in 1933. Englishman Henry Littledale patented copper salts mixed into glue. Fire chars the glue, freeing pure copper. Where a grain touches gold, that point melts first. The joints fuse before the gold melts. Then the copper sinks into the gold, leaving no trace. But this wasn't new. 23 centuries ago, Theophrastus described a copper mineral for soldering gold.

Its name was chrysocolla, literally gold glue. Pliny the Elder called the goldsmiths' copper solder santerna. Scholars think santerna is an Etruscan word. The lost secret sat in old books, by name. The craft never even died out. Russian, Persian and Tibetan goldsmiths kept using it. Castellani's answer was in an Italian mountain village. Its craftsmen still made wedding necklaces the old way. 26 centuries, never broken. We never lost the craft, only the eye to read the records.

 

LIMITS

 

1) The jewellery. Etruscan goldsmiths of the 7th century BC decorated gold with patterns made of tiny gold grains, a technique now called granulation. A well known example is a gold fibula (brooch) from Vetulonia, mid 7th century BC, in the National Archaeological Museum in Florence. The smallest Etruscan grains measure about 0.14 millimeters; most are nearer 0.25. The Etruscans did not invent granulation; the oldest known examples come from Ur, around 2500 BC. Source: Jochem Wolters, The Ancient Craft of Granulation, Gold Bulletin 14, 1981.

2) No visible solder. Wolters notes that Etruscan granulation from about 700 BC onward shows no remnant of solder alloy, while granulation from several other periods shows clear solder traces.

3) The 19th century. The Castellani goldsmiths of Rome wrote in Antique Jewellery and Its Revival (London, 1862) that the almost invisible grains of gold, like fine sand, presented nearly insurmountable difficulty; that they consulted Pliny, Theophilus and Benvenuto Cellini; and that modern goldsmiths had agreed to consider such work inimitable.

4) Littledale. British patent 415,181, filed on 23 March 1933 by H. A. P. Littledale, describes soldering with copper oxides or salts mixed with glue or gum, which are reduced to metal in place during heating. He later linked the method to ancient Greek and Etruscan work. As Wolters explains it, the glue chars, the copper is reduced to metal, and where it alloys with the gold at the contact points the melting point drops, so only those points join; longer heating spreads the copper into the gold and leaves no visible residue. Published temperatures differ, so we do not show them.

5) The ancient names. Wolters cites Theophrastus, around 300 BC, as the first writer to mention a copper mineral, chrysocolla (literally gold glue), as a solder. Pliny the Elder (Natural History 33.29) describes the goldsmiths' chrysocolla, called santerna, made from verdigris of Cyprian copper, the urine of a young boy and nitre. Wolters, citing the linguist Alfred Ernout (1929), treats santerna as a word of Etruscan origin; this is a scholarly interpretation.

6) Never lost. Wolters argues that granulation was never a lost art, continuing in Russia, Bulgaria, Mongolia, Tibet and Persia and in Swiss and German folk jewellery into the 19th century. Castellani himself wrote that in Sant'Angelo in Vado, a remote Apennine district, some Etruscan processes were still in use, and that village girls wore necklaces and long earrings called navicelle at their weddings.

7) Still debated. Exactly how Etruscan goldsmiths joined their grains is not settled. Other researchers have argued for different processes, for example Andrea Cagnetti (2009) on fluid brazing, and laboratory analyses of individual pieces continue (for example Parrini, Formigli and Mello, American Journal of Archaeology, 1982).

8) Limits. The images are AI generated illustrations, not photographs of specific museum objects, and the diagrams are simplified and not to scale.

 

 

 

 

 

 

 

https://www.youtube.com/shorts/9NfJElx3JNM?feature=share

 

 


Reply
Prau123 avatar
Posts: 4441
Topic starter
(@prau123)
Famed Member
Joined: 8 years ago

 

Wood in this mine hasn't rotted away in five hundred years. Wieliczka, home of a salt chapel. Salt was cut here for nearly seven hundred years. Nine levels, 327 meters deep. Rock salt looks solid, but it flows very slowly. Some chambers close by 2 millimeters a year. So miners stacked logs crosswise into towers called cribs. They held up the ceilings of emptied chambers. The problem? Wood rots easily in damp ground. If a crib rots, the ceiling comes down.

Yet an old saying went around this mine. The salt protects the wood. In 2007, the museum tested it. Its wood samples were up to four centuries old. Salt filled it, dozens of times normal levels. Four centuries on, its basic makeup resembled fresh wood. A decades old log was rinsed in cold water. It came out nearly like fresh pine. Salt soaked in and pickled the wood. The salt mine stood on wood the salt saved.

But some wood had turned black and crumbled. Every blackened piece bore marks of iron fittings. In salt, iron rusts fast. That rust seeped in, leaving the wood as acidic as lemon juice. The very salt that saved the wood ruined it wherever iron touched. Tree rings date its oldest wood to the fourteen hundreds. Bolts and timber still hold it up. Salt squeezes the mine, yet guards its wood. Five hundred years on, it still hasn't rotted away.

 

LIMITS

 

1) The mine. Rock salt was mined at Wieliczka near Kraków from the 13th century until commercial mining stopped in 1996, after falling salt prices and flooding. Its workings reach about 327 meters below ground on nine levels. It was on UNESCO's first World Heritage List in 1978. Sources: Wikipedia, Wieliczka Salt Mine; Pytel, Parchanowicz and Mertuszka, Geomechanical risk analysis for the historical salt cavern Saurau in Wieliczka mine (arXiv 1907.13406).

2) Why supports. Pytel and colleagues name the slow creep of rock salt as the most important cause of the movement measured in the Saurau chamber, where roof and floor came about 2 mm closer in one year. That is one chamber, not an average for the mine. They write that such chambers are controlled today mostly with rock bolts and wooden support sets.

3) The cribs. From the start, timber was the main building material of the mine. Logs of fir and spruce, later pine, were stacked into cribs to hold up the ceilings of chambers left after the salt was cut out; iron was used only for necessary fittings and reinforcements (Wróblewska and Owczarzak, Drewno, 2008).

4) The 2007 study. On the museum's initiative, the Institute of Wood Technology in Poznań analysed six salted wood objects that had spent about 50 to 400 years underground. Their ages were estimated by museum staff from records and equipment types. The wood held 8.93 to 39.40 percent mineral matter, against 0.2 to 0.6 percent in ordinary wood. A pine chamber casing, probably 17th century, kept high cellulose and normal lignin, though its surface showed early decay. A 1960s pine piece differed from fresh pine only by salt that could be washed out with cold water (Wróblewska and Owczarzak 2008).

5) Not rot proof. The same study found fungal threads and spores in salted wood under the electron microscope. Salt slowed decay a great deal; it did not stop it. Six samples cannot stand for every timber in the mine.

6) Iron. Wood that touched iron fittings was dark, brittle and acidic, down to pH 1.95. In salty conditions iron corrodes fast and its compounds penetrate the wood and speed its breakdown (Wróblewska and Owczarzak 2008; Łucejko, Modugno, Colombini and Zborowska, Journal of Cultural Heritage, 2012). Lemon juice is about pH 2. We found no source saying miners chose wood because iron fails in salt, so we do not say it.

7) Tree rings. Szychowska Krąpiec and Dudek (Geological Quarterly, 2014) dated spruce from casings on the first level and found trees cut down in the 15th century, alongside wood from every later century. The abstract does not say whether that oldest wood still carries load today.

8) What we left out. The legend of Princess Kinga's ring, famous visitors, and the depth of Saint Kinga's Chapel, which sources give differently.

9) The images are AI generated illustrations, not photographs. The diagrams are simplified and not to scale, and real rock salt here is grey, not white.

 

 

 

 

 

 

 

 

 

 

 

 

Salt Pickled the Wood That Holds Up This Mine

 

 

 

https://www.youtube.com/shorts/xcvKYoxfQCI?feature=share

 

 

 

 

 

 

 

 

 

 

 

 

 

image

 

 

image

 

 

image

 

image

 

image

 

image

 

image

 

image

 

 

image

 

 

 

image

 

 

image

 

 

image

 

 

image

 

 

image

 

 

image

 

image

 

 

image

 

image

 

image

 

image

 

image

 

 

image

 

 

 

image

 

 

 

 

 

 

 

 

At the Wieliczka Salt Mine near Kraków, Poland, timber support beams have remained intact for over 500 years because the mine's dense salt environment naturally "pickles" the wood and blocks decay. Beyond its preserved medieval engineering, the historic UNESCO World Heritage site is world-famous for housing St. Kinga's Chapel, an underground sanctuary carved almost entirely out of rock salt. [1, 2, 3]
Why the Wood Hasn't Rotted

  • Natural Salt Pickling. Miners stacked logs crosswise into cribs to brace the ceilings of excavated chambers. Over centuries, salt absorbed deep into the timber fibers—reaching levels dozens of times higher than normal—which prevented fungi and bacteria from breaking down the wood. [1]

  • Remarkable Preservation. Testing on centuries-old spruce beams revealed that their internal cellular structure still resembles fresh timber. While wood remained solid, any iron fittings used alongside it corroded and caused localized blackening. [1, 2]

  • Whitewashed Fire Protection. Many 17th-century beams and props still bear a distinct white coating made from calcium and water. Miners applied this mixture to protect the timber from fire and to reflect light from their oil lamps. [1]

The Underground Salt Chapels

  • Chapel of St. Kinga. Located 101 meters (330 feet) underground, this cathedral-sized space was carved by hand between 1896 and 1963. Every surface—including the floor, altars, biblical bas-reliefs, and crystal-like chandeliers—is sculpted from rock salt. [1, 2, 3]

  • Over 20 Places of Worship. Miners carved dozens of shrines and chapels throughout the mine's 287 kilometers (178 miles) of tunnels to pray for safe shifts. The oldest surviving example is St. Anthony's Chapel, built in the 17th century. [1, 2, 3, 4]

  • Active Cultural Venue. Today, the mine welcomes over 1.2 million visitors annually. St. Kinga's Chapel still hosts Sunday Mass, weddings, and concerts, while deeper chambers operate as an underground health resort for respiratory therapy. [1, 2, 3, 4]

 

 

 

 

 

 

 

 

 

 

 

 

 

image

 

 

 

 

 

 

700 years ago, miners in southern Poland discovered something extraordinary.
They didn't just dig for salt. They carved an entire world underground.
The Wieliczka Salt Mine stretches 178 miles of tunnels across 9 levels, reaching 1,073 feet below the surface. Miners spent generations carving chapels, sculptures, and chandeliers — all from solid salt.
The crown jewel? The Chapel of St. Kinga. A full cathedral, 177 feet long and 36 feet high, with salt-carved altars, bas-reliefs of the Last Supper, and chandeliers whose crystals are made of salt.
It has been in continuous operation since the 13th century. It was one of the first sites ever placed on the UNESCO World Heritage List in 1978.
Every year, 1.5 million visitors descend into the earth to see it.
Most people think of Poland and think of history and hardship. They don't realize Poland is also home to one of the most breathtaking places on Earth.
Have you ever been underground in a cathedral? Would you visit Wieliczka?

 

 

 

 

 
 
 
 
 
 
 
 
 
 

Hidden wonder: Poland's 700-year-old underground salt mine is a hidden city of chapels, lakes and sculptures carved from salt | World News - The Times of India

 

 


Reply
Page 575 / 576
Share: